HP T6553 D45 Reference Manual page 265

FUP Messages
Cause. A syntax error occurred in the qualified file-set expression. The additional text
should describe the specific error.
Effect. The command fails.
Recovery. Retry the command after correcting the syntax.
ILLEGAL SYNTAX
Cause. A syntax error occurred in the attempted command.
Effect. The command fails.
Recovery. Retry the command after correcting the syntax.
ILLEGAL VALUE
Cause. The attempted command specified an illegal value: for example, SET EXT -1.
Effect. The command fails.
Recovery. Retry the command after correcting the value.
INDEX BLOCK SIZE SET EQUAL TO DATA BLOCK SIZE
Cause. An attempt was made to create a DP2 key-sequenced file with the index block
size and data block size set to different values.
Effect. The CREATE command finishes, but the IBLOCK value for the file is set to its
BLOCK value.
Recovery. If the modified IBLOCK value is not the value required, reset the BLOCK
and IBLOCK values, and retry the command. The index block size must equal the data
block size for DP2 key-sequenced files.
INSUFFICIENT CAPABILITY
Cause. An attempt was made to execute a command reserved for the super ID
(255,255).
Effect. The command fails.
Recovery. Only the super ID can use the attempted command.
INTERNAL LOAD ERROR:
Cause. An internal program error occurred.
Effect. The command fails.
nnn
File Utility Program (FUP) Reference Manual—523323-014
3-13