Fc Guidelines; Fc Examples - HP T6553 D45 Reference Manual

FUP Commands
D
deletes the character above the D. Repeat to delete more characters.

FC Guidelines


If you do not use parameters, FC displays the last command line entered.

When you finish editing the line or have no changes to make, press RETURN to
execute the modified command.

Use the HISTORY command to obtain line numbers.

You must begin your correction explicitly with one of the subcommands if the first
character of the change is I, D, or R. Type the D or R under the character to be
deleted or replaced. Type the I under the character that follows the insert position.

If you enter a string without a preceding subcommand, R is assumed.

The subcommand begins its operation at the character positioned directly above it.
FC displays the modified line and prompts for another subcommand.

Specify more than one subcommand per line by separating the subcommands with
a double slash (//).

To abort the FC command and not execute the modified command, press the
BREAK key or the CTRL and Y keys—or enter a double slash (//) in columns 1 and
2 and immediately press RETURN.
Note. For more information about the FC command, see the Guardian User's Guide .

FC Examples


To change the DETAIL option in the first command to the STATISTICS option:
-FC
-INFO MYFILE, DETAIL
.
-INFO MYFILE, STAT
.

Spaces typed after the I or R subcommand are part of the text to insert or replace.
To make more than one change per line by ending the text string with two slashes
(//) and spacing over:
-FC
-DUP FILE1, FILE2
.
-DUP FILE13, FILE14
.
ddSTAT
i3// r14
File Utility Program (FUP) Reference Manual—523323-014
2-74
FC Guidelines