5) Connect the terminals to the terminal blocks. Check the wire colors against the wiring
label attached inside the front panel to prevent miswiring. The terminal block on the left
is for the dishwasher, and the one on the right is for the booster tank.
6) Reattach the control box cover and the front panel.
Terminal Block for
Dishwasher (left)
Line Side Screw Torque:
6 AWG - 45 in lbs
8 AWG - 40 in lbs
Terminal Block for
Booster Tank (right)
6. PHASE REVERSAL CHECK
The unit is provided with a phase reversal relay to prevent operation in case of phase
reversal. To check for phase reversal, follow the steps below.
1) Make sure all wiring connections have been properly made. For details, see "5.
(/(&75,&$/ &211(&7,21´
7XUQ RQ WKH SRZHU VXSSO\ WKHQ SUHVV WKH ³212))´ EXWWRQ RQ WKH RSHUDWLRQ SDQHO
3) If the display is blank, turn off the power supply. Lockout/Tagout to prevent the power
from being turned back on inadvertently.
4) Swap 2 of the power supply wires on the dishwasher terminal block.
7XUQ WKH SRZHU VXSSO\ EDFN RQ WKHQ SUHVV WKH ³212))´ EXWWRQ &RQILUP WKDW WKH
display lights up.
6) Turn off the power supply.
Bushing
Downgrade
Grounding
12
1-1/4" Conduit