[F] Splash Guard; [G] Table Limit Switch - Hoshizaki JWE-2400CUA-L-25B Installation Manual

3) Hook the dishtable on the wash tank. Drill a hole
in the wash tank to match the mounting hole in the
dishtable.
To prevent possible corrosion, do not leave any shavings after drilling the hole in
the wash tank.
4) Secure the dishtable to the dishwasher with a screw.
Apply silicone sealant to the screw threads as shown on
the right and between the dishtable and the wash tank.
 5H¿W WKH VLGH SDQHO LQ LWV FRUUHFW SRVLWLRQ

[f] SPLASH GUARD

Install the accessory guards (L) and (R) to prevent water
from splashing out of the entrance and exit of the wash
compartment onto the dishtable during washing operation.
1) Remove the screws from the entrance and exit of the
wash compartment.
 8VH WKH UHPRYHG VFUHZV WR VHFXUH WKH JXDUGV / DQG 5  7LJKWO\ ¿W WKH JXDUG WR WKH
front frame of the dishtable.

[g] TABLE LIMIT SWITCH

7KH ³212))´ EXWWRQ ZLOO QRW ZRUN ZLWKRXW WKH WDEOH OLPLW VZLWFK FRQQHFWHG
The table limit switch stops washing operation when a rack reaches the end of the clean
dishtable. It is also required to prevent damage to the dishes in the racks.
1) Drill a cable hole and mounting holes in the back frame of the clean dishtable.
IMPORTANT
Screw if required
Fit tightly
Dishtable
Guard (L)
5
Drill a hole
Dishwasher
Min 1/2"
(12.7mm)
Guard (R)