Water Separator Buzzer Sounds; Water Separator Indicator - Honda Marine BF200A Owner's Manual

TAKING CARE OF UNEXPECTED PROBLEMS
If there is no water flowing from the
cooling system indicator, stop the
engine and check the discharge port
first then tilt the outboard motor to
inspect the water intake screens. If
clogged, clean the water intake
screens, return the outboard motor to
the running position, restart the
engine, and check the cooling system
indicator again.
If there is still no water flowing from
the cooling system indicator, or if the
engine protection system remains
activated after 30 seconds, return to
the nearest boat landing, and have the
outboard motor inspected by an
authorized Honda marine dealer.
92
WATER SEPARATOR
BUZZER SOUNDS
WATER SEPARATOR
When the water separator buzzer
sounds (a rapid, repeating signal):
1. Check the water separator for
water contamination. If water is
accumulated, stop the engine, and
clean the water separator following
the instructions on pages
or consult with an authorized
Honda outboard motor dealer.
WATER SEPARATOR
INDICATOR
Digital Speedometer
Normal
Abnormal
When the water separator indicator
blinks:
Check the water separator for water
contamination. If water is accumlated,
stop the engine, and clean the water
separator following the instructions
72 73 , on pages 72
an authorized Honda marine dealer.
73 , or consult with