Fuses; Electric Starter Will Not Operate; Battery Will Not Charge; Fuse Replacement - Honda Marine BF200A Owner's Manual

TAKING CARE OF UNEXPECTED PROBLEMS

FUSES

Electric Starter Will Not
Operate
The 10A, 15A, and 30A main fuses
protect the electric starter relay and
related circuits.
The 10A main fuse protects the
ignition switch and related circuits. If
this fuse blows, the engine will not
start or run, and the power trim/tilt
switch will not activate the trim/tilt
mechanism.

Battery Will Not Charge

A 150A ACG fuse protects the
alternator circuit. If the ACG fuse
blows, the engine will not charge the
battery. Refer to ACG Fuse
88

Fuse Replacement

Main Fuse
1. Stop the engine.
2. Disconnect the battery.
3. Remove the engine cover.
4. Remove the fuse cover.
(p. 89 ).
FUSE HOLDER
FUSE COVER
5. Use the fuse puller from the tool
kit to remove the fuses. If a fuse is
blown, install a replacement fuse
of the same specified rating. The
outboard motor is supplied with
spare fuses in the fuse holder.
MAIN FUSE RATINGS:
10 A, 15 A, 30 A
FUSE PULLER
BLOWN