SERVICING YOUR OUTBOARD MOTOR
Lubrication Points
Apply marine anticorrosion grease to the following parts:
Lubrication interval:
After the first 20 hours or 1 month, then every 100 hours
or 6 months. (Refer to the maintenance schedule page
56
).
Apply anticorrosion oil to pivot surf aces where grease
cannot penetrate.
Apply Honda Marine Corrosion Inhibitor (or equivalent) to all areas under the engine cover and any exposed metal
surfaces except the belts.
64
THROTTLE REEL
PIT THRUST RECEIVER
(each side)
PROPELLER SHAFT
THROTTLE ARM/SHIFT
ENGINE COVER
ARM SHAFT
LATCH (each side)
TILT LOCK LEVER/SHAFT CAM
SWIVEL
SHIFT ARM/
CLICK
ROLLER/
NEUTRAL
SWITCH
TILT SHAFT