Honda Marine BF200A Owner's Manual page 68

SERVICING YOUR OUTBOARD MOTOR
SPARK PLUG
WRENCH
6. Remove the spark plugs with a
spark plug wrench and 19 mm
wrench.
66
0.039 0.051 in
(1.00 1.30 mm)
SEALING
WASHER
19 mm EYE
WRENCH
7. Inspect the spark plugs. Replace
them if the electrodes are worn, or
if the insulators are cracked or
chipped.
8. Measure the spark plug electrode
gap with a wire-type feeler gauge.
The gap should be 0.039
inches (1.00
gap is out of the specification,
replace the plug with a new one.
Never try to readjust the gap.
9.
10.
0.051
1.30 mm). If the
Install the spark plugs carefully,
by hand, to avoid cross-threading.
After each spark plug seats, tighten
with a spark plug wrench supplied
in the tool kit to compress the
sealing washer.
If reinstalling used spark plugs,
tighten 1/8 - 1/4 turn after the
spark plugs seat.
If installing new spark plugs,
tighten 1/2 turn after the spark
plugs seat.
Loose spark plugs can overheat
and damage the engine.
Overtightening the spark plugs
can damage the threads in the
cylinder head.