Power On/Off; Turning On The Power; Turning Off The Power - Hitachi CP-X8150 User Manual

Power on/off

Power on/off

Turning on the power

1.
Make sure that the power cord is rmly
and correctly connected to the projector
and the outlet.
2. Make sure that the POWER indicator is
lighted in steady orange (
remove the lens cover.
3.
Press STANDBY/ON button on the projector
or the ON button on the remote control.
The projection lamp will light up and POWER indicator will begin blinking in
green. When the power is completely on, the indicator will stop blinking and
light in steady green (
To display the picture, select an input signal according to the section Selecting an
input signal (

Turning off the power

1.
Press the STANDBY/ON button on the projector or the STANDBY button on
the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON or STANDBY button again while the message
appears.
The projector lamp will go off, and the POWER indicator will begin blinking
in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete (
3.
Attach the lens cover, after the POWER indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
• Turn the power on/off in right order. Please power on the projector
NOTE
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT POWER ON (
items of the OPTION menu.
24
118). Then
118).
26).
►A strong light is emitted when the projector's power is on.
POWER indicator
STANDBY/ON button
118).
64) and AUTO POWER OFF (
STANDBY button
ON button
64)