Hitachi CP-X8150 User Manual page 93

SECURITY menu
Item
PRESENTATION
(continued)
SERVICE
84
• To change from Single PC mode to Multi PC mode,
press ► button to choose OK in the dialog and press
the ENTER or INPUT button.
The display mode is changed.
• For details on how to switch the display mode to Multi
PC mode on your computer, refer to the manual for
"LiveViwer".
MULTI PC
• The Presenter mode setting of the selected
MODE
computer becomes valid when the display mode is
(continued)
changed to Single PC mode.
Also, the Presenter mode setting
becomes invalid when the
display mode is changed to Multi
PC mode, regardless the setting
on the computers.
For details, refer to the manual for "LiveViewer".
Selecting this item displays the user name. This
function helps you identify from which computer the
current image is sent.
DISPLAY
• You can set a user name for each computer on
USER NAME
"LiveViwer". For details, refer to the manual for
"LiveViewer".
Executing this item restarts and initializes the network functions.
Choose the NETWORK RESTART EXECUTE using the button ►.
Then use the button ► to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting NETWORK RESTART EXECUTE, NETWORK menu
may not be controlled approx. 30 seconds.
Description