Displaying Stack Menu - Hitachi CP-X8150 User Manual

3. STACK menu settings
Set the Intellectual Stack operation using the STACK menu.
NOTE
• If you are using Simple Stack without RS-232C connection, skip this
chapter.
• If you do not need to change the settings made during the installation
explained prior to this chapter, go to
• Read 3.7 Important information for Intellectual Stack

3.1 Displaying STACK menu

Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.
( Operating Guide
setting for Intellectual Stack operation starts from this menu.
NOTE
• Check that the following settings are made on both projectors.
Otherwise, STACK menu on the projectors cannot be operated. (
- STANDBY MODE in SETUP menu: NORMAL
( Operating Guide
- COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
( Operating Guide
- STACK LOCK in SECURITY menu: OFF (
→ OPTION menu) The
→ SETUP menu)
→ OPTION menu)
3.3 Selecting lamp operation
5 )
13
mode. (
carefully. ( 20 )
5 )
15 )