Hitachi CP-X8150 User Manual page 80

Item
SERVICE
(continued)
(continued on next page)
SERIAL SETTINGS
Select the serial communication condition for the
CONTROL port.
BAUD RATE
• The BAUD RATE is xed to 19200bps and PARITY
is xed NONE when the COMMUNICATION TYPE
is set to OFF (
COMMUNICATION
TRANSMISSION METHOD
(continued)
Select the transmission method for communication by
the NETWORK BRIDGE from the CONTROL port.
HALF-DUPLEX: This method lets the projector
FULL-DUPLEX: This method lets the projector
• HALF-DUPLEX is selected as the default setting.
• If you select HALF-DUPLEX, check the setting of
the item RESPONSE LIMIT TIME (
Description
4800bps 9600bps
PARITY
NONE ODD
70).
HALF-DUPLEX
make two way communication, but only one
direction, either transmitting or receiving data, is
allowed at a time.
make two way communication, transmitting and
receiving data at the same time.
OPTION menu
19200bps
EVEN
FULL-DUPLEX
72).
38400bps
71