Hitachi CP-X8150 User Manual page 240

Example of computer signal
Resolution (H x V) H. frequency (kHz)
*1 1280 x 1024
*2 1400 x 1050
*3 1680 x 1050
*1 1600 x 1200
*4 1920 x 1200
*1) Supported except for HDMI
*2) Only for CP-X8150, CP-X8160 and CP-SX8350.
*3) Only for CP-WX8240, CP-WX8255, CP-WU8440 and CP-WU8450.
*4) Only for CP-WU8440 and CP-WU8450, but except for HDMI
NOTE • Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a computer.
• Some computers may have multiple display screen modes. Use of some of
these modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(1600x1200) or with W-UXGA only for CP-WU8440 and CP-WU8450, the
signal will be converted to the projector's panel resolution before being
displayed. The best display performance will be achieved if the resolutions of
the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
2
V. frequency (Hz)
91.1
65.2
65.3
75.0
74.0
TM
input.
Rating
85.0 VESA
60.0 VESA
60.0 VESA
60.0 VESA
60.0 VESA
TM
input.
Signal mode
SXGA (85Hz)
SXGA+ (60Hz)
WSXGA+ (60Hz)
UXGA (60Hz)
W-UXGA (60Hz)
Reduced Blanking