Connecting Power Supply; Using The Security Slot - Hitachi ED-X20 User Manual

Setting up

Connecting power supply

1.
Put the connector of the power cord into
the AC inlet of the projector.
2.
Firmly plug the power cord's plug into
the outlet. In a couple of seconds after
the power supply connection, the POWER
indicator will light up in steady orange.
Please remember that when the AUTO ON function (37) activated, the
connection of the power supply make the projector turn on.
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range. The power outlet should be close to the projector and
easily accessible. Remove the power cord for complete separation.
• Never modify the power cord.

Using the security slot

This product has the security slot for the Kensington
lock. For details, see the manual of the security tool.
WARNING ►Do not use the security slot to
prevent the projector from falling down, since it is not
designed for it.
NOTE • The security slot is not comprehensive theft prevention measures. It
is intended to be used as supplemental theft prevention measure.
0
All manuals and user guides at all-guides.com
AC inlet
A C
IN
Connector of the
power cord
to the outlet
Security slot
COMPUTER IN1
S-VIDEO
K
VIDEO
POWER
indicator
POWER
COMPUTER IN2
MONITOR OUT CONTR