Selecting Input Source For Sub - Hitachi CP-X8150 User Manual

3.5 Selecting input source for Sub

1.
Highlight SUB INPUT SOURCE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the SUB INPUT SOURCE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight FOLLOW MAIN UNIT or FIXED
(COMPUTER IN 1).
port as Main.
Main projector.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. (
NOTE
• If FIXED (COMPUTER IN 1) is selected, either the
or port can be selected as an input source on the Main projector. When
any button to select an input port on the remote control or the
the projector is pressed, the MAIN INPUT SOURCE dialog will be displayed on
screen. Select COMPUTER IN 1 or COMPUTER IN 2 with the ▲/▼ buttons.
• If FIXED (COMPUTER IN 1) is selected, the
Sub projector should be connected to the
projector with a computer cable. The image from the selected port is output
from the
port on the Sub projector. The MONITOR OUT setting on the Main projector is
disabled when FIXED (COMPUTER IN 1) is selected. (
SETUP menu)
• If FIXED (COMPUTER IN 1) is selected, video signals can be input to the
signal input in the COMPUTER IN menu and set the video format in the
VIDEO FORMAT menu. Refer to
Inputting image from Main to Sub - Video signal (either component or
( 28 )
: Sets the input source on the Sub projector to the same
: Sets the input source on the Sub projector to the
port which is connected to the
19 )
port on the Main projector to the
or port on the Main projector. Set the port for video
Inputting image from Main to Sub
18
STACK menu settings
port on the
button on
port on the
port on the Main
Operating Guide
24 ) and
(
video).
→