Cleaning And Replacing The Air Lter - Hitachi CP-X8150 User Manual

Maintenance
Cleaning and replacing the air lter (continued)
10.
Put the lter cover back into the place.
Turn the projector on and reset the lter time using the FILTER TIME item
11.
in the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▲/▼ cursor buttons, then press the
► cursor (or the ENTER / the RESET) button. A dialog will appear.
(3) Press the ► cursor button to select the "OK" on the dialog. It performs
resetting the lter time.
WARNING
is not plugged in, then allow the projector to cool sufciently.
►Use only the air lter of the specied type. Do not use the projector without the
air lter or the lter cover. It could result in a re or malfunction to the projector.
►Clean the air lter periodically. If the air lter becomes clogged by dust or the
like, internal temperatures rise and could cause a re, a burn or malfunction to
the projector.
• Please reset the lter time only when you have cleaned or replaced
NOTE
the air lter, for a suitable indication about the air lter.
• The projector may display the message such as the "CHECK THE AIR
FLOW" or turn off the projector, to prevent the internal heat level rising.
114
► Before taking care of the air lter, make sure the power cable