Tools Window - Hitachi CP-X8150 User Manual

3.2 Crestron e-Control

3.2.2 Tools window

2
1
3
Congures the settings between the projector and Crestron
Click the [Exit] button to return to the Main window.
• If two-byte characters are used, the input text or numbers cannot be
NOTE
set correctly.
• All items on this window cannot be left blank.
1 Crestron Control
Congures the settings of Crestron
Item
IP Address
Port
To apply the settings, click the [Send] button.
2 Projector
Congures the network settings of the projector.
Item
Projector Name
Location
Assigned To:
The usable symbols are space and the following: !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
To apply the settings, click the [Send] button.
®
(continued)
®
control system devices.
Congures the IP address of the control system.
Congures the IP ID of the control system.
Species the port number used for communication by the
control system.
Congures the name of the projector. The length of the
Projector Name can be up to 64 alphanumeric characters.
Congures the location name of the projector. You can specify
a Location name up to 32 alphanumeric characters.
Congures the user name for the projector. You can specify a
user name up to 32 alphanumeric characters.
3. Web Control
4
5
®
control system.
45