Slideshow Mode, Playlist - Hitachi CP-X8150 User Manual

PC-LESS Presentation (continued)
Slideshow Mode
The Slideshow mode displays images in full screen and switches the images at
intervals set in INTERVAL on the Thumbnail menu (
You can start this function from the Slideshow menu. To display the Slideshow
menu, select the SLIDESHOW button in the Thumbnail menu and press the
ENTER button on the remote control, INPUT button on the control panel, or click
[ENTER] on the Web Remote Control.
Operating by buttons
While the Slideshow is displayed, the following button operations are enabled
when still images are displayed, and the same button operations in the Full
Screen mode are enabled when movies are displayed.
Button operation
Remote
Control panel
control
ENTER INPUT
• These operations are not accessible while the projector OSD is
NOTE
displayed.
• It is not possible to change the input port by using the INPUT button when the
Thumbnail screen, Slideshow, or Full Screen image is displayed.
• When the Slideshow mode is set to ONE TIME and the last le is a still image,
the last slide of the presentation will remain displayed until the ENTER button
on the remote control or Web Remote Control, or the INPUT button on the
control panel is pressed.
Web Remote
Control
Displays Thumbnail.
[ENTER]
Presentation tools
95).
Functions
99