Hitachi CP-X8150 User Manual page 163

3. Web Control
3.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
Item
Schedule
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item
Time
Command
[Parameter]
Power
Input Source
My Image
Messenger
Slideshow
Click the [Register] button to add new commands to the schedule list.
Click the
Click the [Reset] button to delete all commands and reset the schedule settings
from the schedule list.
28
Click the [Enable] check box to enable the schedule.
Congures the month and date.
This item appears only when Specic date (No. 1-5) is
selected.
Congures the time to execute commands.
Congures the commands to be executed.
Congures the parameters for power control.
Congures the parameters for input switching.
Congures the parameters for My Image data display. (
Congures the parameters for Messenger data display. (
Congures the Start/Stop parameters for the Slideshow.
button to delete commands from the schedule list.
50)
51)