Setting On Stack Menu; Displaying Stack Menu - Hitachi CP-X4021N User Manual

3. Setting on STACK menu

Using STACK menu, set the
• If you use
NOTE
chapter.
• If you do not need to change the setting that is set during the installation
explained prior to this chapter, jump to
• Read carefully 3.7 Important information for Intellectual

3.1 Displaying STACK menu

Using the ▲/▼/◄/► buttons, go down the menu tree as below.
ADVANCED MENU
> SERVICE > COMMUNICATION
STACK menu will appear on screen.
(Operating Guide
setting for Intellectual Stack
• The following setting must be confirmed on both of projectors.
NOTE
Otherwise, STACK
- STANDBY MODE
(Operating Guide
- COMMUNICATION TYPE
(Operating Guide
- STACK LOCK in
All manuals and user guides at all-guides.com
Intellectual Stack
Simple Stack without RS-232C cable connection, skip this
> OPTION
> STACK
→ OPTION menu). The
operation is started from the menu.
menu on the projectors cannot be operated. ( 7 )
in SETUP menu:
→ SETUP menu)
in COMMUNICATION
→ OPTION menu)
SECURITY menu:
operation.
3.3 Selecting lamp working
NORMAL
in SERVICE
( 7 )
OFF
17
mode. ( 19 )
Stack. ( 24 )
menu: OFF