Watching 1V - Zenith VR2135 Operating Manual And Warranty

, WATCHING TV (Antenna In TV Connections)
POWER IIST0P AEJECT
®
l
I
. /_ I_F -/_//_/
/
DA 4-Head Hi-Fi/Hi-Speed RewindlAuto Tracking J J
SP/IEP e RECJIl'R
[[ J i _J3
i
Note: This setup (Antenna In TV Connections) requires that the TV be tuned to the same channel
that the VCR Ch3-4 Switch is set at, either Channel 3 or 4. -_.
There are three tuning options available to you for selecting channels
to watch on your TV. You can use the TV tuner, the VCR tuner, or
the Cable Box Tuner (if you have a cable box).
"iV Tuner
1. Turn TV and VCR on, tune TV to Channel 3.
2. Set Remote to VCR mode.
3. Press TV/VCR SOURCE repeatedly to turn off VCR indi-
cator in VCR Message Center.
4. Set Remote to TV mode. Select channels with Remote or TV
controls.
Note: Remote will operate most Zenith TVs.
VCR Tuner
1. Turn TV and VCR on, tune TV to Channel 3.
2. Set Remote to VCR mode.
3. Press TV/VCR SOURCE repeatedly until VCR indicator
appears in VCR Message Center.
4. Select desired channel with Remote or VCR Channel
Up/Down.
Cable Box Tuner
1. Turn TV, VCR and cable box on, tune TV to Channel 3.
2. Set Remote to VCR mode. Tune VCR to cable box output
channel number; 2, 3, 4, 5 or 6.
3. Press TV/VCR SOURCE repeatedly until VCR indicator
appears in VCR Message Center.
4. Tune cable box to desired channel number.
6_1