Watching Tv Through The Vcr - Zenith VRA424 Operating Manual

Watching TV Through the VCR

All-Channel
Antenna
Cable TV
Wall Jack
Or
Direct Cable
Typical
Cable Box
From Or
Cable- TV IN OUT
System
Cable Box
CH3 CH4
Output
to VCR
Selecting Channels when the VCR is OFF
1. Turn TV on.
2. Select channel you'd like to watch at the TV. If
you have a cable box, select channel 3 or 4 at
the TV. Selects cable box channels at the cable
box.
Selecting Channels at the TV when VCR is
ON
1. Turn TV and VCR on.
2. Place VCR in TV mode by pressing TV/VCR on
the remote repeatedly until the
disappears from the VCR front panel.
3. Select channel you'd like to watch at the TV. If
you have a cable box, select channel 3 or 4 at
the TV. Select cable box channels at the cable
box.
Zenith Stereo VCR
CHANNEL
3 4
OUT
VCR Output to TV
(Channel 3 or 4 when
AUDIO VIDEO
VCR is on and TV/VCR
VHF/UHF/CATV
OUT OUT
is in VCR position)
R L
IN
Audio/Video Output to TV
Selecting Channels at the VCR when VCR is
ON
1. Turn TV and VCR on.
2. Place VCR in VCR mode by pressing TV/VCR on
remote repeatedly until the
appears in the VCR front panel.
3. Select channels 3 or 4 at the TV. If you have
connected your VCR to the TV's A/V input
jacks, select the A/V source at the TV for a
better picture.
symbol 4. Select the channel you'd like to watch at the
VCR
VCR. If you have a cable box, select channel 3
or 4 at the VCR. Select cable box channels at
the cable box.
O P E R AT I O N P A G E 2 5
This page
shows a
typical video
system and
explains how
Zenith TV
to select
channels.
VHF-UHF
CABLE IN
VIDEO AUDIO
IN IN
L R
symbol
VCR