Table of Contents
Advertisement
INSTALLATION
VCR Setup Checklist
Step A Connect
Cables to System Components
["7 1. Make equipment connectionsto VCR, (see _e fol!owingpages in this section.)
['7 2. Plug all system components into householdcurrent(120V AC-Line Outlet).
Remove shipping plug from front ahdio/video jacks.
:-:.!'-_"::."-
'-
"
_:"
.T'"
:::7
_
, ....
_
:-.-,:
_-.'"
, :.._:-_'_--"'_i7
"':'_"
"=--_'
_'_
"':_"_'
.
.....
"_ "
.e
Step B Personalize On-Screen Menus
Set up VCR Features for your particular system, (see section 4-VCR Features Setup.)
[--] 1. (Optional) Specify Spafiish for On-Screen Menus.
[--'] 2. Set the VCR Clock.
["7 3. Perform Auto Channel Search.
[-"] 4. (Optional)
Specify, ADD or DEL (Delete) in Channel
Scan.
-
Step C VCR Plus Setup VR4185
F']I.
Set up VCR Plus and Channel Map for your local broadcast area. See section 12-VCR Plus Setup.
Once Steps A, B and C are complete,
your VCR is ready to use.
Notes to above steps:
You can change the on-screen menu system, so it appears in Spanish instead of English.
The VCR clock must be set before attempting to record using the VCR timer.
Auto Channel Search registers the channels you receive; numerically. You can then customize your
channel scanning selection with the optional Channel ADD/DELETE
Procedure.
You can specify if a
particular channel should be omitted or included (added/deleted) when scanning channels.
If you move or change equipment connections to the VCR, redo the channel search.
You must complete the VCR Plus Setup procedure, before you can record using the VCR Plus
feature.
You must channel map for your local broadcast area, or the program you record may be from a
different channel than the one you intended.
Note: If • power failure occurs and lasts for over 15 minutes, you will have to reprogram the VCR features.
]
J
Hide quick links:
Advertisement
Table of Contents
