Watching Tv Through The Vcr - Zenith VRA423C Operating Manual

P A G E 2 6 O P E R AT I O N

Watching TV Through the VCR

This page
shows a
typical video
system and
explains how
to select
Cable TV
channels.
Wall Jack
From
Cable- TV
System
Selecting Channels when the VCR is OFF
1. Turn TV on.
2. Select channel you'd like to watch at the TV. If
you have a cable box, select channel 3 or 4 at
the TV. Selects cable box channels at the cable
box.
Selecting Channels at the TV when VCR is
ON
1. Turn TV and VCR on.
2. Place VCR in TV mode by pressing TV/VCR on
the remote repeatedly until the
disappears from the VCR front panel.
3. Select channel you'd like to watch at the TV. If
you have a cable box, select channel 3 or 4 at
the TV. Select cable box channels at the cable
box.
All-Channel
Antenna
Or
Direct Cable
Zenith Stereo VCR
Typical
Cable Box
Or
IN OUT
Cable Box
CH3 CH4
Output
to VCR
VCR
CHANNEL
3 4
OUT
VCR Output to TV
(Channel 3 or 4 when
AUDIO VIDEO
VCR is on and TV/VCR
VHF/UHF/CATV
OUT OUT
is in VCR position)
R L
IN
Audio/Video Output to TV
Selecting Channels at the VCR when VCR is
ON
1. Turn TV and VCR on.
2. Place VCR in VCR mode by pressing TV/VCR on
remote repeatedly until the
appears in the VCR front panel.
3. Select channels 3 or 4 at the TV. If you have
connected your VCR to the TV's A/V input
jacks, select the A/V source at the TV for a
better picture.
symbol 4. Select the channel you'd like to watch at the
VCR. If you have a cable box, select channel 3
or 4 at the VCR. Select cable box channels at
the cable box.
Zenith TV
VHF-UHF
CABLE IN
VIDEO AUDIO
IN IN
L R
symbol
VCR