Additional; Index Search; Auto Clock Set; Auto Daylight - Zenith VR2135 Operating Manual And Warranty

ADDITIONAL INFORMATION
Index Search (Use to access each recorded segment's beginning)
Each time a recording starts, the VCR marks that
location with an index mark; Index 1, Index 2, In-
dex 3, etc. These kr.ations can then be accessed by
using the Search mode. (From the Stop or Play
mode,) press SEARCH to begin Index Search -_ - _
mode.
For example, rewind the tape to the beginning.
Press SEARCH. To advance the tape to Index loca-
tion three, follow on-screen instructions, then press
3. The tape will move to-'recording start Index loca-
tion 3 and start playback. Note: This feature only
works with tapes recorded on this VCR.
Real-Time Tape Counter
The Real-Time Tape Counter will only count re-
corded segments on VHS cassette tapes. If the on-
screen tape counter stops at a location while the
tape is moving, then the recorded segments have
ended and blank segments are being passed over at
that location on the tape; the Real-Time Tape
Counter will not count the blank (unrecorded) seg-
ments of a tape.
MEMORY-- Press while a tape is being played or
recorded, to zero the Real-tiros tape counter. If
you activate the Counter Memor_ofeature, the VCR
will automatically stop at the M 0-00:00 position
when the tape is rewdund.
Special Menu
--AUTO CLOCK SET On/Off Adjustment
--AUTO DAYLIGHT SAVINGS On/Off Adjust-
ment
Step 1. Press MENU to place VCR Main Menu on
TV screen.
Step 2. Press 4567 to access the Special Menu.
Use SELECT and ADJUST keys to choose and
specify:
Auto Clock Set-- VCR will automatically set the
clock.
Auto Daylight Set-- VCR will automatically adjust
the VCR clock for Daylight savings time.
Press QUIT when finished.
Audio Record Mode
Step 1. Press MENU. Press ADJUST
Left/Right
repeatedly to choose AUDIO, press MENU.
Step 2. Use SELECT Up/Down to specify
AUDIO RECORD MODE.
Step 3. Use ADJUST Left/Right arrows to spec-
i_:---STEREO_ MONO or 2ND AUDIO.
Audio Playback Mode
Step 1. Press MENU. Press ADJUST Left!Right
repeatedly to choose AUDIO, press MENU.
Step 2. Use SELECT Up/Down to specify
AUDIO PLAYBACK MODE.
Step 3. Use ADJUST Left/Right arrows to spec-
ify:--Hi-Fi, or Normal.
Hi-Fi m Sound will be heard in Stereo, if available.
Normal-- Sound will be heard in Monaural,
whether Audio source is Stereo, Monaural or 2nd
Audio.
Stereo w Records sound from the left and right
sound tracks as supplied by the program source.
Mono (Monaural)-- Records Monaural sound only.
2nd Audio-- Records the 2nd Audio sound track,
if available.
Notes: Broadcast programs can be heard in Stereo
as supplied by the broadcast signal to the TV
Tuner. However, to hear Stereo sound from the
VCR Tuner or during tape playback, you must use
the VCR AUDIO/VIDEO Out jacks as the source.
The TV, or sound source, must be set up to use (as
the picture and sound source) the TV Audio/Video
In jacks. Only the VCR Audio/Video Out jacks pro-
vide Stereo output for a tape playing in the VCR.
13 -- 1