Zenith VR2135 Operating Manual And Warranty page 21

WATCHING TV (Audio/Video in TV Connections)
V_42_F
. POWER II$T0P AEJECT
DA 4-Head Hi-Fi/Hi-Speed Rewind/Auto Tracking
_a
• SP_EP • REC/ITR
J [[ I 1 3_
Note: This setup (Audio/Video In TV Connections) requires that the TV use the _iu.dio/Video In jacks
as the source of the TV picture. " -'-
There are three tuning options' available to you for selecting channels
to watch on your stereo TV. You can use the TV Tuner, the VCR
Tuner, or the Cable Box Tuner (if you have a cable box). To hear
stereo sound from the VCR Tuner or a tape playing in the VCR, use
the TV Audio/Video Input as the source for the TV picture.
TV Tuner
Follow instructions on previous page for TV viewing.
VCR Tuner
(Requires Audio/Video In jacks on TV)
1. Turn TV and VCR on, set TV to Audio/Video Input.
2. Switch Remote to VCR mode.
3. Select desired VCR channel with Remote or VCR Channel
Up/Down.
Cable Box Tuner
1. Turn TV, VCR and cable box on, set TV to Audio/Video
In
Source.
2. Switch Remote to VCR mode. Tune VCR to your cable box
output channel number; 2, 3, 4, 5 or 6.
3. Tune cable box to desired channel number.
6_2