Playing Tapes Options - Zenith VR2135 Operating Manual And Warranty

PLAYING TAPES
i
DA 4-Head Hi-Fi/Hi-Speed RewindlAuto Tracking
<1<1_1_ PrAY I_Vr
J,]
Use these buttons
Playing Tapes Options
(See Remote Control and Additional Information Sections)
A. Pause/Variable Speed Forward/Reverse Slow Motion
Video
(While in Play mode) Press PAUSE twice, follow on-screen
instructions for slow motion. Press PLAY to resume playing
tape. To adjust Slow Motion playback speed while in forward
or reverse slow motion, press and hold down FAST FWD for
faster slow motion, press and hold down REW for slower
slow motion. Press PLAY to resume playback.
B. Tape Rewind/Fast Forward
(While in Stop mode) Press and release REWIND or FAST
FWD. Press STOP when tape reaches desired location.
C. Reverse/Forward Search
(While in Play mode) Press and release REWIND or FAST
FWD, and hold down REWIND or FAST FWD for Jet
Search. Press PLAY to resume playing tape.
D. Tracking Adjustment Auto/Manual
Your Zenith VCR automatically adjusts tracking when you
play a tape. If, however, the tape was recorded on a different
VCR, streaks (video noise) may appear. While the tape is
playing, press and hold down ADJUST (Left/Right) to manu-
ally adjust the tracking.
E. Index Search
At the start of each recording an Index mark is inserted on
the tape. Press SEARCH, then the number of the marks (1,
2, 3 etc.) that need to be passed to reach your desired
recording start location, then press FAST FWD or REWIND
as appropriate. Or, rewind the tape to the beginning and press
the number of marks from the beginning of the tape that will
get you to your recording start location, then press FAST
FWD, the VCR advances the tape to that location and
begins
playback.
Use
these
keys
Use
these
keys
7_2