Table of Contents
Advertisement
Figure 8-25: The End Station view.
2 To add a new end station, type the host name in the Name field, and an optional
description in the Description field.
3 If DLCS is running in your network devices, you can click Lookup, and the
Enterprise Manager will use DLCS to try to find the IP Address, switch device, and
port associated with the host name you entered. It will enter them for you into the
appropriate fields.
If DLCS is not running or cannot find the host, then type the host IP Address into
the IP Address field.
4 Click the Device selector box to the right of the Device field to list the Access
Devices known to the Enterprise Manager. Select the appropriate device from this
list and click OK.
5 Enter the port number into the Port field.
6 Click Save to save the additions or changes.
E
W
E
M
XTREME
ARE
NTERPRISE
ANAGER
I
U
G
NSTALLATION AND
SER
UIDE
A
M
E
S
DDING OR
ODIFYING
ND
TATIONS
8-49
Advertisement
Table of Contents
