Database Connection Parameters - Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual

D U
ATABASE TILITIES
This example assumes a database user ID of
defaults used when the database server is installed through the ExtremeWare Enterprise
Manager installation process. If you have changed your database user ID and password,
substitute your actual user ID and password in the command.
< > is the directory where the Enterprise manager software is installed.
install_dir
Substitute the actual directory name in the command.
< > is the directory where the backup copy of the database should be stored.
backup_dir
Substitute an actual directory name in the command.
This command generates a backup of the database in the specified backup directory.
The backup consists of two files,
are backed up. These files should be saved so they can be used to replace the original
files in the event of a problem.
Syntax: dbbackup [switches] directory
Table C-3: dbbackup Command Switches
Switch
-c "keyword=value; ..."
-y
D C
ATABASE ONNECTION
These are the parameters for the -c command-line switch. If the connection parameters
are not specified, connection parameters from the SQLCONNECT environment variable
are used, if set.
Table C-4: Database Connection Parameters for dbbackup Utility
uid= <user name>
pwd= <password>
dbf=< database_file>
C-4
dba
and
basecamp.db
Description
Supply database connection parameters
Replace files without confirmation
P
ARAMETERS
The user name used to login to the database. Default is
dba. The user ID must have DBA authority.
The password used to login to the database. Default is sql.
The name of the file that stores the data. This is the file to be
backed up.
, with password . These are the
sql
All database files
basecamp.log.
E W E
XTREME ARE NTERPRISE
M I U
ANAGER NSTALLATION AND SER
G
UIDE