Table of Contents
Advertisement
To edit a Virtual Chassis Stack, follow these steps:
1 Select a Virtual Chassis Stack from the pull down list in the VC Stack field.
The dialog box displays all the Summit Virtual Chassis and Summit Switches that
are either included in the selected stack, or are considered orphans (not included in
any VC stack).
2 To add a Summit Virtual Chassis to the stack, select the Virtual Chassis in the
Orphan VCs list. Click the right arrow button located between the Orphan VCs and
the VCs in Stack lists. The selected VC is moved to the VCs in Stack list.
3 To add a Summit switch to the stack, select the switch in the Orphan Summits list.
Click the right arrow button located between the Orphan Summits and the
Summits in Stack lists. The selected Summit switch is moved to the Summits in
Stack list.
Note: Each Summit switch and Virtual Chassis may appear in only one VC stack
4 To remove a Summit Virtual Chassis from the VC stack, select the Virtual Chassis
and click the left arrow button. The selected switch is moved to the Orphan VCs list.
5 To remove a Summit switch from the VC stack, select the switch and click the left
arrow button. The selected switch is moved to the Orphan Summits list.
Note: There must be at least one Virtual Chassis and one Summit switch in a VC
6 When you have finished adding and removing switches, click the Apply button to
register the changes in the ExtremeWare Enterprise Manager database.
At any time before you click Apply, you can click Reset to undo the changes you have
made. This restores the Virtual Chassis stack to the state it was in when you started.
When you add a Summit switch to a Virtual Chassis stack, you may also need to
configure the switch ports to indicate which ports are in SummitLink mode, and
whether they are configured for Load Sharing. See "Configuring Virtual Chassis Stack
Ports" for directions on how to do this.
C
ONFIGURING
If you have Administrator or Manager access, you can configure the mode and load
sharing attributes of the ports on the Summit switches in a VC stack.
E
W
E
M
XTREME
ARE
NTERPRISE
ANAGER
within the Enterprise Manager database.
stack.
V
IRTUAL
I
U
G
NSTALLATION AND
SER
C
S
HASSIS
TACK
UIDE
C
V
C
ONFIGURING
IRTUAL
HASSIS
P
ORTS
S
P
TACK
ORTS
9-13
Advertisement
Table of Contents
