Identifying The Virtual Chassis Stack Topology - Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual

Version 2.0
Table of Contents

Advertisement

— The SummitLink Mode box indicates whether the port is configured for
connection to a Virtual Chassis. A check indicates the port is in SummitLink
mode. No check indicates the port is in Ethernet mode.
— The Load Sharing field indicates whether the port is configured for load sharing.
None indicates the port is not configured for load sharing. 2 port or 4 port
indicates the port is configured as one of the ports used for load sharing.
4 To change the SummitLink mode for a port, click in the box to turn the check mark
on or off. A check mark indicates that the port is in SummitLink mode.
When you change the SummitLink mode for a port that is configured for Load
Sharing, Enterprise Manager automatically sets the SummitLink mode configuration
for the other port(s) involved in the load sharing.
5 To change the Load Sharing configuration, pull down the menu associated with the
Load Sharing field for the port, and then select the appropriate value (None, 2 port,
or 4 port).
The pull-down menu only presents choices that are valid for the switch type. For
example, if the Switch is a Summit1 or a Summit4, you have all three choices (None,
2 or 4 port configuration). For a Summit2 switch, you only have the choice of None
or 2 port.
When you select Load Sharing for a port, ExtremeWare Enterprise Manager will
automatically set the load sharing configuration for the other port(s) involved in the
load sharing. For example, on a Summit2 switch, if you set Port 17 to 2 port,
Enterprise Manager also sets Port 18 to 2 port.
See the Summit Switch Installation and User Guide for details on load sharing
configurations.
I
DENTIFYING THE
You must have Administrator or Manager access to force a re-identification of the
Virtual Chassis stack topology.
To identify all Virtual Chassis stacks, click Identify at the top of the Virtual Chassis
Stack Manager page.
The Identify All VC Stacks pop-up dialog appears, as shown in Figure 9-10.
E
W
E
M
XTREME
ARE
NTERPRISE
ANAGER
V
IRTUAL
I
U
G
NSTALLATION AND
SER
UIDE
I
DENTIFYING THE
C
S
HASSIS
TACK
V
C
S
T
IRTUAL
HASSIS
TACK
OPOLOGY
T
OPOLOGY
9-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware enterprise manager 2.0

Table of Contents