Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual page 32

I E W
NSTALLING THE XTREME ARE
Note: See the ExtremeWare Enterprise Manager Release Notes for the most current
information on installation requirements.
The ExtremeWare Enterprise Manager server installation process installs two
components:
• The ExtremeWare Enterprise Manager Database Engine
• The ExtremeWare Enterprise Manager Web Server
I
NSTALLING ON A
The following sections assume that Microsoft Windows NT is already running.
Note: For information on installing and running Windows NT, refer to the
documentation supplied with your Microsoft Windows NT software.
I E
NSTALLING THE
To install the ExtremeWare Enterprise Manager components under Windows NT you
must have Windows NT administrator privileges.
If you have a previous release of ExtremeWare Enterprise Manager installed (1.0 or 1.1)
the installation script will also handle migrating your database information to the new
Enterprise Manager 2.0 installation.
Note: To update an evaluation copy of the Enterprise Manager to a licensed copy
without reinitializing the database, follow the update procedure described in the
section "Updating an Evaluation Version to a Licensed Version."
To install the ExtremeWare Enterprise Manager, follow these steps:
1 Close any open applications.
2 Insert the CDROM into the CDROM drive.
3 In most cases, the ExtremeWare Enterprise Manager Welcome screen appears
automatically. If it does not:
a Choose Run from the Start Menu.
The Run dialog box appears.
b Type
d:\nt\setup
If the CDROM is not drive
2-2
E M
NTERPRISE ANAGER
W
INDOWS
M
NTERPRISE ANAGER
in the text box and click OK.
, substitute the correct drive letter.
d
NT S
YSTEM
S
ERVER
E W E
XTREME ARE NTERPRISE
M I U
ANAGER NSTALLATION AND SER
G
UIDE