Installing A Summit X650 Series Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 123: Removing the Switch from a Four-Post Rack
SH_148
5 Set the switch on a secure work surface. Using a #1 Phillips screwdriver, remove the front mounting
brackets from the sides of the switch.
6 Remove the rear mounting brackets from the rear rack posts.

Installing a Summit X650 Series Switch

The Summit X650 series switch fits into a standard 19-inch equipment rack. The provided
rack-mounting brackets are adaptable to either two-post or four-post (cabinet) mounting.
The installation process includes the following tasks:
1 Install the switch in the rack.
2 Install one or two power supplies and connect power cables.
3 Connect network interface cables.
If you are installing Summit X650 series switches for use in a SummitStack configuration, read
Chapter 2, "Building a SummitStack Configuration," before you install the switches.
149
Summit Family Switches Hardware Installation Guide