Extreme Networks Summit X150 Series Hardware Installation Manual page 192

Installing Summit External Power Supplies
Figure 164: Installing the EPS-600LS Unit in the EPS-C Chassis
! See Manual
O.T.P
DC OK
AC OK
3 Slide the unit completely into the chassis until the front of the EPS-600LS is flush with the surface of
the EPS-C (see
4 Tighten the two captive screws on the EPS-600LS unit into the EPS-C (see
the unit in place.
Figure 165: Securing the EPS-600LS to the EPS-C Chassis
O.T.P
DC OK
! See Manual
AC OK
5 Connect an appropriate AC power cord to the AC connector on the EPS-600LS unit (see
Use the cable clip on the EPS-600LS unit to hold the AC power cord in place (see
192
Figure 165).
Tighten Screws
EPS-600LS
EPS-C_04A
Figure
EPS-C_05A
Summit Family Switches Hardware Installation Guide
165). This secures
Figure 166).
Figure 166).