Summit X650 Series Switches - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X650 Series Switches

The Summit X650 series switches provide 24 front-panel Ethernet ports that provide 10-gigabit Ethernet
connectivity using fixed 10GBASE-T RJ-45 ports or installable SFP+ optical modules.
The Summit X650 series switches include the following base models:
Summit X650-24t Switch
●
Summit X650-24x Switch
●
A serial console port on the front panel of the Summit X650 series switch allows you to connect a
terminal and perform local management. An Ethernet management port can be used to connect the
system to a parallel management network for administration. Alternatively, you can use an Ethernet
cable to connect this port directly to a laptop to view and locally manage the switch configuration. The
Ethernet management port supports 10/100/1000 Mbps speeds.
The rear panel of the switch requires an installed versatile interface module or VIM. The types of VIM
available for the Summit X650 series switch are:
VIM1-SummitStack versatile interface module (see
●
Provides two 20-Gbps stacking ports and four 1-gigabit SFP ports
VIM1-10G8X versatile interface module (see
●
Provides two 20-Gbps stacking ports and eight 10-gigabit SFP+ ports
VIM1-SummitStack512 versatile interface module (see
●
Provides four 128-Gbps stacking ports
VIM1-SummitStack256 versatile interface module (see
●
Provides two 128-Gbps stacking ports
NOTE
The Summit X650 switches require VIM1 modules. Other VIM types that may appear to be mechanically compatible
with the Summit X650 switches will not function if they are installed in these switches.
The rear panel of the switch has a replaceable versatile interface module (VIM) that provides one of the
following port options:
Two 20-Gbps stacking ports and four 1-Gbps SFP ports (VIM1-SummitStack module; see
●
Two 20-Gbps stacking ports and eight 10-Gbps SFP+ ports (VIM1-10G8X module; see
●
Four 128-Gbps stacking ports (VIM1-SummitStack512 module; see
●
The Summit X650 series switch must have an installed VIM; the switch will not operate correctly
without one.
Cooling is provided by a replaceable fan module. Two power supply bays accommodate either AC or
DC power supplies.
Summit Family Switches Hardware Installation Guide
page 70)
page 70)
page 71)
page 71)
page
page 70)
page 70)
71)
67