Viewing Mobility Agent Display - Extreme Networks Summit WM Getting Started Manual

Availability and Mobility configuration
To view mobility manager display:
1 From the main menu, click Reports. The Reports & Displays screen is displayed.
2 Click the appropriate mobility manager display.
Client Location in Mobility Zone – Displays the active wireless clients and their status.
●
You can perform the following actions on the Client Location in Mobility Zone display screen.
Sort this display by home or foreign Summit WM Controller.
■
Search for a client by MAC address, user name, or IP address.
■
Define the refresh rates for the display.
■
Export the information on the display screen as an .xml file
■
Mobility Tunnel Matrix – Displays the state of inter-Summit WM Controller tunnels as well as
●
the relative loading for user distribution across the mobility domain.
The Mobility Tunnel Matrix display provides the following information:
Tunnel uptime
■
Number of clients roamed (mobility loading)
■
Local Summit WM Controller loading
■
Mobility membership list
■
Both displays depict the state of the tunnels in color codes:
Green – Indicates the mobility manager is in communication with an agent and the data tunnel
●
has been successfully established.
Yellow – Indicates the mobility manager is in communication with an agent but the data tunnel is
●
not yet successfully established.
Red – Indicates the mobility manager is not in communication with an agent and there is no data
●
tunnel.

Viewing Mobility Agent display

If you have configured a Summit WM Controller as a mobility agent, an additional display — Agent
Mobility Tunnel Matrix — appears on the Reports & Displays screen.
To view mobility agent display:
1 From the main menu, click Reports. The Reports & Displays screen is displayed.
2 Click Agent Mobility Tunnel Matrix. The mobility agent display screen appears.
The mobility agent display depicts the number of mobility clients in each data tunnel and shows
each tunnel's uptime in color codes:
Green – Indicates the mobility agent is in communication with the mobility manager and the data
●
tunnel has been successfully established.
Yellow – Indicates the mobility agent is in communication with the mobility manager, but the
●
data tunnel is not yet successfully established.
Red – Indicates the mobility agent is not in communication with the mobility manager and there
●
is not data tunnel.
In addition, the display also depicts the mobile clients' location information. You can look for a
specific mobile client by MAC address, IP address, or user name.
122
Summit WM Getting Started Guide, Software Version 5.1