Extreme Networks Summit WM Getting Started Manual page 29

Some of the information listed in the table may not be relevant to your network configuration. You
should only record the information that is pertinent to your network configuration.
Table 6: Information gathering table
Configuration data Description
Accessing the • Unused IP address in the 192.168.10.0/24 subnet – This IP
Summit WM
Controller for the
first time
• Factory default IP address of Summit WM Controller – The
• Login Information – The login information is as follows:
Management • Hostname – Specifies the name of the Summit WM
Port information
• Domain – Specifies the IP domain name of the enterprise
• Management IP Address – The new IP address for the
• Subnet Mask – The subnet mask for the IP address to
• Management Gateway – The default gateway of the
• Primary DNS – The primary DNS server used by the
• Secondary DNS – The secondary DNS server used by the
Hardware • MAC Address – MAC address of the Summit WM
information
• Serial # – The Summit WM Controller's serial #.
License Key (File) An .xml file that is provided along with the product. This file
must be applied to the product to enable all the
functionalities.
Summit WM Getting Started Guide, Software Version 5.1
address must be assigned to the Ethernet port of your
laptop computer. You can use any IP address between
192.168.10.2 and 192.168.10.255.
factory default IP address is https://192.168.10.1:5825.
You must type this IP address in the address bar of your
Web browser when you access the Summit WM Controller
for the first time.
> User Name: admin
> Password: abc123
Controller.
network.
Summit WM Controller's management port. Change the
value in this text box to the IP address assigned to the
Summit WM Controller's management port by your
network administrator.
separate the network portion from the host portion of the
address (typically 255.255.255.0)
network.
network.
network.
Controller's management port
Your entry
29