Extreme Networks Summit WM Getting Started Manual page 120

Availability and Mobility configuration
NOTE
The Mobility Manager link is not displayed in the left pane with the demo license.
3 To enable mobility for this Summit WM Controller, select the Enable Mobility checkbox. The
mobility options are displayed.
4 Select the This Summit Controller is a Mobility Manager option. The mobility manager options are
displayed.
5 In the Port drop-down list, click the interface of the Summit WM Controller that is to be used as the
mobility manager.
Ensure that the selected interface is routable on the network.
6 In the Heartbeat text box, type the time interval (in seconds) at which the mobility manager sends a
heartbeat message to the agent. The default is 5 seconds.
7 In the SLP Registration drop-down list, click one of the following:
Enabled – If you select Enabled in the SLP Registration drop-down list, the mobility agents
●
discover the mobility manager with the help of SLP DA.
Disabled – If you select Disabled in the SLP Registration drop-down list, the mobility agents
●
will use the static IP of the mobility manager for the mobility manager discovery.
If you select Enabled in the SLP Registration drop-down list, you must configure SLP on the
network.
NOTE
If you have configured DHCP service in Windows 2003 server, you must make sure to enable Option 78 SLP DA in
Configure Options window. For more information on how to configure Option 78 SLP DA, see
in Windows 2003 Server" on page
120
53.
Summit WM Getting Started Guide, Software Version 5.1
"Configuring DHCP