4 Click Configure Captive Portal Settings. The Captive Portal Configurations screen is displayed.
5 Select the Internal Captive Portal option.
6 Type the values in the following text boxes:
Login Label – The text that will appear as a label for the user name.
●
Password Label –The text that will appear as a label for the user password text box.
●
Header URL – The URL of the file to be displayed in the header of the Captive Portal screen.
●
Footer URL – The URL of the file to be displayed in the footer of the Captive Portal screen.
●
NOTE
The maximum width allowed for the header and footer is 790 pixels. There is no restriction on the height.
If the width of the header/footer is more than 790 pixels, the header/footer will appear truncated on the Captive
Portal screen.
Message – The message that you type in this text box will appear above the Login text box to
●
greet the user. You can type a message explaining why the Captive Portal screen is displayed and
the instructions for the user.
Replace Gateway IP with FQDN – If you are using FQDN (Fully Qualified Domain Name) as
●
the gateway address, you must type the FQDN in this text box.
Default Redirection URL – The URL to which the wireless devices will be directed after
●
authentication.
Specific Message URL –
●
7 In the right pane, select the VSA (Vendor Specific Attributes) that you want to send to the
authentication server along with other authentication details for authentication purpose.
WAP Serial Number
●
WAP Name
●
WM-AD Name
●
SSID
●
Summit WM Getting Started Guide, Software Version 5.1
101