Extreme Networks Summit WM Getting Started Manual page 38

Summit WM Controller configuration
• Summit WM200 Controller
• Summit WM20 Controller
10 In the Management Port Settings section, click Modify. The System Port Configuration screen is
displayed.
11 Type the following information:
Hostname – Specifies the name of the Summit WM Controller by which it will be known. You
●
must assign a unique name for the Summit WM Controller.
Domain – Specifies the IP domain name of the enterprise network.
●
Management IP address – Specifies the new IP address for the Summit WM Controller's
●
management port. Change the value in this text box to the IP address assigned to the Summit
WM Controller's management port by your network administrator.
Subnet Mask – Specifies the subnet mask for the Summit WM Controller's management port.
●
Change the value in this text box to the value provided by your network administrator.
Management Gateway – Specifies the default gateway of the network as provided by the
●
network administrator.
Primary DNS – Specifies the primary DNS server used by the network as provided by your
●
network administrator as provided by your network administrator. This field is optional.
Secondary DNS – Specifies the secondary DNS server used by the network as provided by your
●
network administrator. This field is optional.
12 Click OK.
NOTE
The Web connection between the computer and the Summit WM Controller is lost. The IP addresses are now set
to the network you defined.
Now you should connect the Summit WM Controller to the enterprise network. The following section
explains how to connect the Summit WM Controller to the enterprise network.
38
Summit WM Getting Started Guide, Software Version 5.1