Extreme Networks Summit WM Getting Started Manual page 33

Table 6: Information gathering table (Continued)
Configuration data Description
Internal captive • Login Label – The text that will appear as a label for the
portal settings
information
• Password Label – The text that will appear as a label for
• Header URL – The URL of the file to be displayed in the
• Footer URL – The URL of the file to be displayed in the
• Message – The message that you type in this text box will
• Replace Gateway IP with FQDN – If you are using FQDN
• Default Redirection URL – The URL to which the wireless
Shared Secret Password – This password encrypts the information
Password for external exchanged between the Summit WM Controller and the
captive portal external Captive Portal server.
configuration
MAC-based • Port – The port used to access the RADIUS server. The
authentication
information
• # of Retries – Number of times the Summit WM
• Timeout – The maximum time for which Summit WM
• NAS IP Address – IP address of the network access server
Exception filter rules IP/subnet – The destination IP address. You can also specify
information the IP range, a port designation or a port range on the IP
address here.
Static WEP privacy • WEP Key Length – Size of a WEP key.
information
• Strings – This is the secret WEP key string.
WPA-PSK privacy • Broadcast re-key interval – The time interval (in seconds)
information
• Pre-shared Key – The shared secret key that is to be used
The shared secret key is used to generate the 256 bit key.
Dynamic WEP Broadcast re-key interval – The time interval (in seconds)
privacy information after which you want the broadcast encryption key to be
changed automatically. The default is 3600.
Availability • Primary Summit WM Controller's IP address
information
• Secondary Summit WM Controller's IP address
• IP address of primary Summit WM Controller's physical port
• IP address of secondary Summit WM Controller's physical
Summit WM Getting Started Guide, Software Version 5.1
user name.
the user password text box.
header of the Captive Portal screen.
footer of the Captive Portal screen.
be displayed above the Login text box to greet the user.
You can type a message, explaining why the Captive
Portal screen is used and the instructions for the user.
(Fully Qualified Domain Name) as the gateway address,
document the FQDN.
devices will be directed after authentication.
default is 1812.
Controller will attempt to access the RADIUS server.
Controller will wait for a response from the RADIUS
server before making a re-attempt.
(NAS).
after which you want the broadcast encryption key to be
changed automatically. The default is 3600.
between the wireless device and the Wireless AP.
port
Your entry
33