Extreme Networks Summit WM Getting Started Manual page 78

Wireless AP configuration
3 In the IP Address Assignment section, select Use DHCP.
4 In the Add text box, type the IP address of the Summit WM Controller that will manage this
Wireless AP.
5 Click Add. The IP address is added to the list.
6 Repeat Steps 4 to 5 to add additional Summit WM Controllers.
The Wireless AP attempts to connect to the IP addresses (of the Summit WM Controllers) in the
order in which they are listed in the Summit Controller Search List. This feature allows the Wireless
AP to bypass the discovery process. If the Summit Controller Search List is not populated, the
Wireless AP will use SLP to discover a Summit WM Controller.
7 To save your changes, click Save. The Wireless AP reboots.
8 From the main menu, click Reports. The Reports and Displays screen is displayed.
78
Summit WM Getting Started Guide, Software Version 5.1