EUROCOM Notebook V09.1.00BETA User Manual page 200

Intel Video Driver Controls
Figure B - 6
Display Devices &
Settings
B
B - 8 Display Modes
To Enable Intel(R) Dual Display Clone
1. Attach your external monitor to the external monitor port, and turn it on.
2. Go to the Intel Graphics Properties control panel (see
Properties" on page B -
3. Click to choose Intel(R) Dual Display Clone (Operating Mode).
4. Click Apply, and OK to confirm the settings change.
5. Click Display Settings to adjust the settings for the attached devices.
2) and click Display Devices.
"Intel Graphics