EUROCOM Notebook V09.1.00BETA User Manual page 112

Modules & Options
Figure 7 - 6
TPM State
7
7 - 8 Trusted Platform Module
6. Use the arrow keys to select the TPM State menu.
7. Select TPM State, and set the item to Enable & Activate.
Phoenix TrustedCore(tm) Setup Utility
Main Advanced
Current TPM State:
Change TPM State
F1 Help Select Item
Esc Exit Select Menu
8. Press F10 to save the changed BIOS information, exit the BIOS and restart the
computer.
9. If you make any changes to the TPM State you will be asked to Execute/Reject
the change after restart
10. You can now install the TPM driver (see
page 4 - 6).
Security
TPM State
Enabled and Deactivated
[No Change ]
No Change
Enable & Activate
Deactivate & Disable
Clear
-/+ Change Values
Enter Select
("Physical Presence Operations" on page 5 -
"Trusted Platform Module (TPM)" on
Boot Exit
Item Specific Help
Changes TPM State
F9 Setup Defaults
Sub-Menu F10 Save and Exit
15).