EUROCOM Notebook V09.1.00BETA User Manual page 186

Troubleshooting
Problem
The Hibernate function
has disappeared.
8
8 - 12 Problems and Possible Solutions
You have a computer with 4GB of RAM and have installed Windows Vista Service Pack 1. This
is a known issue if your computer has 4GB of RAM and is running Windows Vista Service Pack
1. To re-enable Hibernate mode go to the Command Prompt and type the command "powercfg
-h on" (make sure you are logged on as an Administrator):
1. Click Start (menu button).
2. Type "cmd" in the Start Search box
3. Double click the Command Prompt
4. Type "powercfg -h on" in the Command Prompt window.
5. Close the Command Prompt window.
6. The Hibernate function will now be enabled.
Possible Cause - Solution
when it appears in the menu.
.