Initializing Tpm - EUROCOM Notebook V09.1.00BETA User Manual

Initializing TPM

1. To initialize the TPM it may be necessary to first clear any existing TPM informa-
tion if applicable.
2. Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST.
3. Use the arrow keys to select the TPM State menu.
4. Select TPM State, and set the item to Clear.
Main Advanced
Current TPM State:
Change TPM State
F1 Help
Esc Exit
5. Press F10 to save the changed BIOS information, exit the BIOS and restart the
computer.
6. If you make any changes to the TPM State you will be asked to Execute/Reject
the change after restart
Phoenix TrustedCore(tm) Setup Utility
Security TPM State
Enabled and Deactivated
[Clear ]
No Change
Enable & Activate
Deactivate & Disable
Clear
Select Item -/+ Change Values
Select Menu Enter Select
("Physical Presence Operations" on page 5 -
Boot Exit
Item Specific Help
Changes TPM State
F9 Setup Defaults
Sub-Menu F10 Save and Exit
13).
Trusted Platform Module 7 - 9
Modules & Options
Figure 7 - 7
TPM State - Clear
7