Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control); Total Graphics Memory (Advanced Menu > Advanced Chipset Control); Sata Mode Selection (Advanced Menu) - EUROCOM Multimedia PC V12.1.00 User Manual

BIOS Utilities

SATA Mode
Selection
If you have installed the
Windows 7 operating
system with either IDE
5
or AHCI mode enabled,
DO NOT disable the set
mode (if you wish to dis-
able the set mode you
will need to reinstall the
Windows 7 OS).
5 - 8 Advanced Menu
Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)
You can adjust the Bluetooth module power setting to your preference. The default
setting (Disabled) will see the Bluetooth module powered off when the system is
started up or restarted. Enabling the power setting will have the module retain the
last power status (on or off) before any restart or shut down.
Total Graphics Memory (Advanced Menu > Advanced Chipset Control)
Use this menu item to set the amount of system memory to be allocated for use by
®
Intel Dynamic Video Memory Technology for the graphics device. The default
memory size allocated is Max (up to 1748MB) and this may be adjusted to 128MB
or 256MB (by pressing the spacebar to adjust) if required (see
Memory Technology" on page B -

SATA Mode Selection (Advanced Menu)

You can configure SATA (Serial ATA) control to operate in IDE (native/compati-
ble), AHCI (Advanced Host Controller Interface) modes from this menu. The
SATA Mode should be set BEFORE installing an operating system, and after you
have backed up all necessary files and data (see sidebar).
1).
"Dynamic Video