Upgrading the Hard Disk Drive/SSD
The hard disk drive can be taken out to accommodate other 2.5"(63.5mm) or
3.5"(88.9mm) serial (SATA) hard disk drives (see
Solid State Drive (SSD). Follow your operating system's installation instructions,
and install all necessary drivers and utilities (as outlined in
cedure" on page 4 -
6), when setting up a new hard disk.
See the following pages for the appropriate information:
•
"Removing the 3.5" (88.9mm) HDD" on page 6 -
•
"Replacing the Brackets & Screws in the 3.5" (88.9mm) HDD" on page 6 -
•
"Removing the 2.5" (63.5mm) HDD or SSD" on page 6 -
•
"Removing the 2.5" (63.5mm) HDD from the Bracket." on page 6 -
•
"Removing the SSD from the Bracket." on page 6 - 16
"Storage" on page C -
3), or a
"Driver Installation Pro-
10.
14.
15.
Upgrading the Hard Disk Drive/SSD 6 - 9
Upgrading The Computer
HDD System
Warning
New HDD's are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
12.
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
6
Need help?
Do you have a question about the Multimedia PC V12.1.00 and is the answer not in the manual?
Questions and answers