EUROCOM Notebook User Manual page 72

Drivers & Utilities
2. Prepare a formatted blank 3.5" 1.44MB floppy diskette, and an external USB floppy disk drive.
3. Create a RAID Driver Diskette by using an operable computer to copy the Drivers\RAID\FASTTRAK
folder from the Device Drivers & Utilities + User's Manual CD-ROM (Navigate/Browse.. to
D:Drivers\RAID\FASTTRAK) to the blank floppy diskette.
4. Connect the external USB floppy disk drive to the notebook computer.
5. Startup your computer and press <F2> to enter the BIOS (see
4
6. Set the RAID/ATA Mode Select to RAID Mode (see
page 5 - 10).
4 - 8 RAID Mode Configuration
Main
Figure 4 - 5
Setting items on this menu to incorrect
values may cause your system to malfunction.
BIOS Advanced
System Information
Menu I/O Device Configuration
Reset Configuration Data:
Hyper Threading Technology:
Power On Beep
Card Reader :
RAID/ATA Mode Select
Display Time on LED
F1
Esc
"The Setup Program" on page 5 -
"RAID/ATA Mode Select: (Advanced Menu)" on
PhoenixBIOS Setup Utility
Advanced Advanced Security
Setup Warning
[No]
[Enabled]
[Disabled]
[Enabled]
[RAID Mode]
[Enabled]
Help Select Item -/+
Exit Select Menu Enter
Power Boot Exit
Item Specific Help
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
4).