EUROCOM Notebook User Manual page 68

Drivers & Utilities
6. Select the CD-ROM/DVD-ROM as the first device in the "Boot priority order" by pressing the <Shift>
and <+> keys to move the CD-ROM/DVD-ROM to the top of the order.
4
7. Insert the Microsoft Windows XP OS CD/DVD into the CD/DVD drive.
8. Make sure that the computer is connected to the AC power source, and press F10 to save the changes,
and exit the BIOS.
9. Press a key when you see the message "Press any key to start up from the CD/Press any key to boot
from CD".
10. Press the F6 key when you see the message "Press F6 if you need to install third party SCSI or RAID
driver".
11. When the Windows Setup menu appears, press the <S> key to "Specify Additional Device".
12. Insert the ATA Driver Diskette into the external USB Floppy drive.
4 - 4 ATA Mode Configuration
Main
Boot priority order:
1:
Figure 4 - 2
2:
3:
4:
BIOS Boot Menu
5:
6:
7:
8:
Excluded from boot order:
: USB HDD
: USB CDROM
F1
Esc
PhoenixBIOS Setup Utility
Advanced Security Boot
IDE 0: TOSHIBA DVD-ROM SD-C2612-
USB FDC Y-E DATA USB-FDU-(USB)
PCI SCSI: FT TX Ary 1
IDE 1:
Help Select Item -/+
Exit Select Menu Enter
Exit
Item Specific Help
Keys used to view or
configure devices:
Up and Down arrows
select a device.
<+> and <-> moves the
device up or down.
<f> and <r> specifies
the device fixed or
removable.
<x> exclude or include
the device to boot.
<Shift + 1> enables or
disables a device.
<1 - 4> Loads default
boot sequence.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit